16 Jan 2019

HOLIP Inverter

Comments1

Introduction to Holip Inverter

Holip is a famous brand in the Automation world that invented various inverter for technological work and becomes a brand in the world of automation.

HLP-A-100 series is one in every of the series of Holip electrical converter which is called inverter. One has to read carefully the operation manual before putting the inverter to use so as to correctly install and operate an inverter.

Due to the inverter of a kind of power electronic product, it must be installed, tested and adjusted with specialized electrical engineering workers.

The marks of a Danger and various signs within the manual reminds one in every one of the safeties and hindrance cautions throughout the handling, installation, running and inspection. One ought to follow the instructions to form certain safety in using of the electrical converter.

Before switching on the power of the Holip inverter one should check to have a certainty that the voltage of the most circuit AC power provides matches the input voltage of the Holip inverter. One must install this electrical inverter in an exceedingly safe location, avoiding high temperature, direct sunlight, humid air or water. This electrical converter can solely be used at the places authorized by the assembly company. If more than one drive installed on the same control cabinet, one should make an additional cooling fan, so that the inside temperature is lower than 40, in order to prevent overheating or fire occurs.

Generally, just in case of this electrical Holip inverter, it is required to control it through terminal commands. Special attention must be paid to its use within the case of the formation and stop additional oft places.

Holip Inverter

One should not use any switch elements like circuit breaker or contractor at the output of the electrical converter, if any of such components must be installed due process or other necessities, it must be ensured that the inverter has no output when the switch acts.

In addition, it is not permitted to Install any condensor for improvement of power problems or another thing. Otherwise, it will cost malfunctions, tripping protection, damages of components of the inverter.

One needs to use associate degree freelance power to provide for the electrical converter. One must avoid having the common power got supplies with an electrical welder and alternative instrumentality with high disturbance. Motor overloaded protection is not included in the default settings. If the function becomes a need, set CO1.09 to date value ETR warning.

One shouldn’t create any high voltage test with any associate component within the inverter. These semi-conductor parts are subjects to damage due to high voltage.

The IC board of the electrical converter is suspected to be responsible for the effect and damage of static electricity. installation, empowerment, and maintenance should be performed by qualified professional personnel.

One needs to be sure to turn off the power supply before wiring. One should not disassemble or modify any internal connecting cord, wiring or component of the inverter by oneself. One shouldn’t plug the switches that connect the inverter in the time of switching on an inverter to avoid any surge to the main control board because of plugging which might cause the damage of the inverter.

Even in the case of the main power, the other voltage inputs and the share loads all have been disconnected from the mains, the internal of the drive still has residual energy.

Visit Our HOLIP Inverter Product